Accuracy of conventional impressions and digital scans for implant-supported fixed prostheses in maxillary free-ended partial edentulism: An in vitro study.

OBJECTIVES: To evaluate the accuracy of conventional polyether impressions and digital scans produced by five intra-oral scanners (IOSs) in maxillary free-ended partial edentulism for long-span implant-supported prostheses. METHODS: This in vitro study involved the impression of a maxillary model with free-end partial edentulism, in which six implants were placed before digitization using a desktop scanner to generate a digital reference model. Conventional impressions (Impregum Penta Soft, 3M) and digital scans with five IOSs (Trios 3 and 4, 3Shape; Primescan, Dentsply-Sirona; CS 3600, Carestream Dental; and i-500, Medit) were obtained. Conventional impressions were digitized using the same desktop scanner. Each digital STL file of conventional or digital impressions was superimposed over the reference STL file to enable comparison. Trueness was assessed by calculating angles and distance deviations. For precision, dispersions of values around their means were also measured. RESULTS: The mean distance deviation was significantly higher for conventional impressions (454.24 ± 334.70 µm) than for IOSs (ranging from 160.98 ± 204.48 µm to 255.56 ± 395.89 µm) (p < 0.001). The mean angular deviation was high with conventional impressions (1.82 ± 1.51°), intermediate with CS 3600 (1.38 ± 1.42°), Primescan (1.37 ± 2.54°) and Trios 4 (1.30 ± 0.64°) scanners, and lower with I500 (0.97 ± 0.75°) and Trios 3 (1.01 ± 0.85°) scanners (p < 0.001). The dispersion of distance values around their means was lowest with Trios 3 and i-500, followed by CS3600, Primescan, and Trios 4, respectively, and higher for conventional impressions (p < 0.001). The dispersion of angular values was smallest with i-500, Trios 3, and Trios 4 compared with other groups and was highest with Primescan (p < 0.001). CONCLUSIONS: Within the limits of the current study, Trios 3 scanner exhibited the highest accuracy, followed by i-500, Trios 4, CS 3600, Primescan, and conventional impressions respectively. IOSs might be reliable for the fabrication of an implant-supported prosthesis. In vivo studies are required to confirm these findings. CLINICAL SIGNIFICANCE: Passive adaptation of the implant-supported framework is a challenge when rehabilitating patients with maxillary free-end partial edentulism. While Conventional impressions remain a reliable and validated technique, but IOSs demonstrated higher accuracy, suitable for the fabrication of long-span implant-supported prostheses in partially edentulous arch.

Time efficiency and cost analysis between digital and conventional workflows for the fabrication of fixed dental prostheses: A systematic review.

STATEMENT OF PROBLEM: Time and cost are factors that influence a patient's decision on dental prosthetic treatment. Evidence is needed to demonstrate that restoration using digital systems is more rapid and less costly than the conventional process. PURPOSE: The purpose of this systematic review was to analyze and compare the duration and cost of fixed dental prostheses fabricated using digital and conventional methods from scanning or impression making to delivery of the prosthesis. MATERIAL AND METHODS: A systematic review was performed following the Preferred Reporting Items for Systematic Reviews and Meta-Analysis Protocol (PRISMA-P 2015) guidelines. The analysis methods and inclusion criteria were documented in a protocol registered in the Prospective International Register of Systematic Reviews (PROSPERO) (CRD42023458734). The bibliographic search was carried out using PubMed, Cochrane, and PROSPERO databases. The main keywords used were (Prosthodontic OR restorative dentistry OR denture) AND (CAD CAM OR Digital workflow OR Computer Dentistry OR Digital Design) AND (Economic OR cost OR Financial OR time efficiency). Two investigators undertook the different steps of article selection. RESULTS: A total of 8 articles published between 2010 and 2023 were found for the qualitative synthesis by using the search criteria. Two studies showed that conventional impressions took more time than digital scans for the fabrication of a single crown, and 1 study showed the opposite. One study found that a digital scan was faster than conventional impression making for the fabrication of a 3-unit fixed partial denture, and another study showed the opposite. The dental laboratory technician spent more time on the conventional workflow than the digital workflow for the 3-unit framework and veneering process. No difference was found between conventional and digital workflows for clinical evaluation and chairside adjustment for the fabrication of a single crown. No articles have compared the cost of fixed prostheses. CONCLUSIONS: The digital pathway can shorten the laboratory process. However, the duration of the impression or scan may vary depending on the technique used. Studies are needed to analyze the cost-effectiveness of the fabrication of tooth-supported restorations.

Accuracy of Conventional and Digital Impressions for Full-Arch Implant-Supported Prostheses: An In Vitro Study.

Both conventional and digital impressions aim to record the spatial position of implants in the dental arches. However, there is still a lack of data to justify the use of intraoral scanning over conventional impressions for full-arch implant-supported prostheses. The objective of the in vitro study was to compare the trueness and precision of conventional and digital impressions obtained with four intra-oral scanners: Trios 4 from 3Shape®, Primescan from Dentsply Sirona®, CS3600 from Carestream® and i500 from Medit®. This study focused on the impression of an edentulous maxilla in which five implants were placed for implant-supported complete prosthesis. The digital models were superimposed on a digital reference model using dimensional control and metrology software. Angular and distance deviations from the digital reference model were calculated to assess trueness. Dispersion of the values around their mean for each impression was also calculated for precision. The mean distance deviation in absolute value and the direction of the distance deviation were smaller for conventional impressions (p-value < 0.001). The I-500 had the best results regarding angular measurements, followed by Trios 4 and CS3600 (p < 0.001). The conventional and I-500 digital impressions showed the lowest dispersion of values around the mean (p-value < 0.001). Within the limitations of our study, our results revealed that the conventional impression was more accurate than the digital impression, but further clinical studies are needed to confirm these findings.

Dental Criteria Could Alert for Malnutrition Risk and Inappropriate Choice of Food Texture in Older Subjects with Dementia: An Analytical Cross-Sectional Study.

Oral health indicators are usually collected to alert for the presence of infectious diseases, but the impact of poor oral health on the nutritional status of older people with dementia is often neglected. This study aims to explore the relationship between the number of posterior dental functional units (PFUs) and the anthropometric measure of malnutrition, the mid-upper arm circumference (MUAC), in older people with dementia while controlling for other variables, and to analyze whether the number of PFUs is considered when adjusting the texture of the food provided at mealtimes. A total of 103 individuals who were 70 years or older with dementia were recruited from seven institutions. Cognitive impairment was assessed using the Mini Mental State Examination. Data were collected from medical records (sociodemographic characteristics, presence of chronic diseases, prescribed medications, results of serum albumin level), as well as questionnaires (type of feeding routes, type of food texture, supplements intake, Activity of Daily Living index), clinical examinations (MUAC), and oral health parameters (PFUs, oral dryness, oral hygiene). MUAC was the dependent outcome variable. MUAC was associated with the number of PFUs (p = 0.032); participants with PFU ≤ 4 were 7.5 times more likely to have MUAC < 21 cm than others. Other associations were found between MUAC and albumin level (OR = 12.5; p = 0.001), modified food texture (OR = 4.2; p = 0.035), and length of institutional stay (OR = 5.2; p = 0.033); however, the type of oral feeding was not significantly related to the number of PFUs (p = 0.487) so there is an inadequate correlation between food texture and oral health status. Similar to MUAC, the number of PFUs could be an oral anthropometric criterion that is recorded during routine hygiene care to alert for the risk of malnutrition and the inappropriate choice of food texture in older individuals with dementia.

Relationship between Oral Health Status and Oropharyngeal Dysphagia in Older People: A Systematic Review.

The purpose of this review is to investigate the relationship between oral health status and oropharyngeal dysphagia (OD) in older people and to collect a list of oral health indicators that can enable carers and health professionals to screen for risk of dysphagia in older people during oral examinations. A systematic review was performed following the Preferred Reporting Items for Systematic Reviews and Meta-Analysis Protocol (PRISMA-P 2015) guidelines. The analysis methods and inclusion criteria were documented in a protocol published in the Prospective International Register of Systematic Reviews (PROSPERO) under the registration number CRD42020140458. A total of 19 articles published between 2002 and 2020 were retained by the search criteria for the qualitative synthesis. Eighteen studies demonstrated at least one positive association between an oral health component (dental, salivary and/or muscular) and dysphagia. This review highlights that oral health and OD are associated but was not able to determine causality. The lack of scientific evidence could be explained by the observational approach of the majority of the studies and the irrelevant choice of oral health indicators. A relationship may exist between oral health and dysphagia, but this review highlights the lack of valid and standardized oral health indicators that would be needed to assess the impact of oral health on the overall health status of individuals.

Comprehensive CAD/CAM Prosthetic Rehabilitation Management in a Young Patient with Agenesis: A Case Report.

With the advancement in ceramic restorations bonded to the tooth structure, the treatment has become a practicable and conservative option to restore teeth with shape alteration owing to the high demand for aesthetics, with minimum tooth preparation. This article describes the case of a 25-year-old man who was dissatisfied with his smile. After an assessment of the clinical situation, a decision was made to place a full-mouth prosthodontic rehabilitation (monolithic lithium disilicate glass-ceramic, IPS E-max CAD) with minimal tooth preparation, which figures as a conservative full-coverage approach. The restoration of an aesthetic smile resulted in the patient's satisfaction. Bonding of all monolithic veenerlay and crowns onto minimally prepared teeth figures as conservative treatment in cases of hypodontia.

Validity of Soprolife camera and Calcivis device in caries lesion activity assessment.

Aim An ex vivo study was performed to assess (gold standard [GS]: Nyvad criteria) sensitivities (SEs) and specificities (SPs) of Soprolife (fluorescence) and Calcivis (bioluminescence) - indicated, by the manufacturers, for activity assessment of coronal carious lesions (AACCL). We also calculated the positive and negative predictive values, positive and negative log-likelihoods, inter-examiner and intra-examiner variations, and concordance rates (CRs) of both devices compared to GS and to each other.Materials and methods One hundred and twenty-one extracted posterior teeth were included. Within 48 hours after extraction, ICDAS and Nyvad scores were determined and occlusal photographs (Soprolife and Calcivis captures) were taken. Three examiners were asked to score, independently, twice (T0; T0 + 15 days), the caries activity status (active/inactive) for each image.Results Both devices showed modest SEs and SPs. The only statistically significant differences between devices were for SE (p = 0.04) in favour of Soprolife (all ICDAS scores combined) and for SP (p = 0.03) in favour of Calcivis (ICDAS 3, 4). There were higher CRs for Soprolife than for Calcivis (compared to GS). Intra- and inter-examiner variations were 76-86.8% and 71.9-85.1% for Soprolife, and 79.3-89.3% and 72.7-86.8% for Calcivis, respectively.Conclusion In light of the results, it seems difficult to confirm the validation of Soprolife and Calcivis for AACCL.

Carious lesion activity assessment in clinical practice: a systematic review.

OBJECTIVES: The objective of the manuscript is to systematically review the different techniques developed for activity assessment of coronal carious lesions (AACCL) in clinical settings. MATERIALS AND METHODS: A search of PubMed identified original articles in English reporting on the different concepts/tools for AACCL in clinical settings and, when available, data related to their in vivo/in situ validation in terms of sensitivity, specificity, inter- and intra-examiner reproducibilities, area under the receiving operating curve, positive predictive value, negative predictive value, and relative risk of lesion progression. RESULTS: The present review included 25 articles. Four groups of techniques are available (1) systems based on combinations of visual and tactile criteria; devices based on (2) pH assessment, (3) fluorescence, or (4) bioluminescence. The most studied systems are those based on combinations of visual and tactile parameters when bioluminescence suffers from the lack of in vivo evaluation. Validation studies showed a wide disparity among protocols in terms of populations, dentitions, teeth surfaces, study design, the gold standard, and validation criteria. CONCLUSION: There is a need for definition and harmonization of standards for activity assessment-related concepts/tools, as well as further investigations for in vivo validation of newly developed tools. CLINICAL RELEVANCE: Carious lesion activity is an important component to be taken into account when making decisions as to appropriate clinical caries management. The development and use of validated techniques which are easy to use in everyday dental practice are important.